+1.201.721.7562 Info@Sripath.com 301 Chinquapin Lane | Wexford, PA 15090

Vince.Aurilio

Avatar photo

About Vince Aurilio

Vince Aurilio, P.Eng. is currently the senior technical director of Sripath Technologies, providing technical support across the Sripath Group of Companies to customers and partners worldwide.

With over 40 years of experience as a licensed professional engineer and as an expert in pavement design and materials engineering, Vince Aurilio brings critical expertise and knowledge of industry best practices and trends to every client and project. This includes experience spanning paving solutions for roadways and airports for both private and public transportation.

Aurilio has extensive experience in materials spanning hot mix and warm mix asphalt design and testing, reclaimed asphalt pavement (RAP) mix design, and stone matrix asphalt (SMA) mix design. He is an advocate of balanced mix design (BMD), which seeks to improve pavement performance through consideration of asphalt mix performance properties rather than relying solely on the characteristics of the binder to meet specifications.

Aurilio is also knowledgeable in geotechnical investigation, non-destructive deflection testing (FWD), in-place pavement recycling and full depth reclamation, asphalt performance testing, pavement evaluations, forensic studies, and life cycle cost analysis.

In addition to his work with Sripath, Aurilio is the owner and president of VA Asphalt Pavement Technologies, an independent engineering firm specializing in asphalt materials, pavement design, asphalt mix design, construction QC/QA, forensic evaluations, and training. Aurilio is consulted by global experts and has authored or coauthored over 30 peer-reviewed papers. He is also a sought-after presenter for keynotes focused on paving materials and design.

Aurilio holds a number of affiliations including with the Transportation Research Board, Transportation Association of Canada, and Canadian Asphalt Technical Association, among others. He also held the position of executive director for the Ontario Asphalt Pavement Council (a council of ORBA) from 2015-2019. Based in Ontario, Canada, he has been a licensed member of Professional Engineers Ontario since 1985.

What Are Asphalt Performance Enhancers?

Road networks are under more pressure than ever. Heavier traffic loads, rising temperature extremes, tighter environmental regulations, and increased expectations for service life are all reshaping how pavements are designed and maintained.     In response, the industry has increasingly turned to asphalt performance enhancers: a broad category of asphalt additives designed to improve pavement performance, extend asphalt durability, and enable more resilient, [...]

By |2026-07-08T16:32:21-04:00July 21st, 2026|Categories: Blog|Tags: , , , |0 Comments
Read More

Technical Specifications for Asphalt Rejuvenation

By incorporating reclaimed asphalt and recycled asphalt materials into new mixtures, producers can reduce reliance on virgin materials, lower costs, and support circular economy initiatives. However, higher reclaimed asphalt pavement (RAP) content introduces new performance challenges that must be carefully managed to ensure long-term pavement durability.    The primary challenge stems from the aged binder contained within reclaimed asphalt pavement. Over time, asphalt [...]

By |2026-07-06T18:58:14-04:00July 14th, 2026|Categories: Balanced Mix Design, Blog|Tags: |0 Comments
Read More

PHALANX: Advancing Warm Mix Technology for a Lower-Carbon Asphalt Future

Over the past 20 years, the asphalt industry has undergone a steady transformation driven by rising performance demands, tighter environmental standards, and the need for more efficient construction practices. In response, asphalt mix design has evolved far beyond traditional hot mix methods.    As part of this evolution, Sripath Technologies has consistently developed solutions that respond directly to real-world challenges in binder modification, recycling, [...]

By |2026-07-06T17:44:07-04:00July 9th, 2026|Categories: 20th Anniversary, Blog|Tags: |0 Comments
Read More

Cost Savings and Lifecycle Value in the Asphalt Industry

Asphalt production and paving operations are under constant pressure to balance performance, efficiency, and cost. Agencies, producers, and contractors are expected to deliver durable pavements while managing fluctuating raw material prices, energy expenses, maintenance demands, and increasingly complex mix designs. As a result, the use of asphalt additives and asphalt modifiers has become an important strategy for optimizing production costs and long-term pavement value.    Advanced additive [...]

By |2026-06-01T17:56:15-04:00June 24th, 2026|Categories: Blog|Tags: , , , , , |0 Comments
Read More

 

 

 

 

 

 

Sripath Technologies, LLC | 301 Chinquapin Lane, Wexford, PA 15090| +1.201.721.7562

© 2026 Jay Holding, Inc.

TRADEMARKS: Sripath®, Sripath Technologies®, the Sripath Technologies Logo®, ReLIXER®, PGXpand®, PGXtend®, NuMIXER®, ReNUBIT®, SriCote®, KoolTEQ™, PHALANX®, ButaPhalt®, ButaChem™, Bitpath®, the Bitpath Logo®, Sripath Asia-Pac®, the Sripath Asia-Pac Logo®, Sripath Innovations®, the Sripath Innovations Logo®, ReJUVN8™, ReGENR8™, Make Asphalt Better®, Make Bitumen Better®, Pioneering Sustainable Roadways®, Bitumen Pathways for the Future®, Chemistry from the Lab to the Field®, and the Rocky Asphalt® and Sandy Asphalt® Mascots are trademarks and/or service marks of Jay Holding Inc. and/or its affiliates in the United States of America and/or in other countries. All Rights Reserved.

DISCLAIMER: Although all statements and information contained herein are believed to be accurate and reliable, they are presented without guarantee or warranty of any kind, express or implied. Information provided herein does not relieve the recipient or user from the responsibility of carrying out own tests, experiments, and validation. The recipient or user assumes all risks and liability for use of the information and results obtained. Statements or suggestions concerning the use of materials and processes are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all toxicity data and safety measures are indicated herein or that other measures may not be required.

Digital marketing by PageLauncher.com.

Translate »
Go to Top